centos7.X 搭建 socks5一键脚本

搬瓦工机场JMS

1. 一键搭建命令

代码如下:

sudo wget https://ap-guangzhou-1257892306.cos.ap-guangzhou.myqcloud.com/asi/httpsocks5.sh && sh httpsocks5.sh

安装好后默认是

sosks5 端口为 59395 帐号为 asi 密码为 asihacker

http 代理端口为 59394

下面把 shell 脚本代码贴出来~~~

需要修改帐号密码的可以自己修改一下~
可能的坑
1.centos 8 可能不行~~~
2. 安全组 防火墙 注意检查~~~

#!/bin/bash
install_http() {
    
  yum install -y squid #安装http代理
  cat <<EOF >/etc/squid/squid.conf
#
# Recommended minimum configuration:
#
acl manager proto cache_object
acl localhost src 127.0.0.1/32 ::1
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1

# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 10.0.0.0/8    # RFC1918 possible internal network
acl localnet src 172.16.0.0/12    # RFC1918 possible internal network
acl localnet src 192.168.0.0/16    # RFC1918 possible internal network
acl localnet src fc00::/7       # RFC 4193 local private network range
acl localnet src fe80::/10      # RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443
acl Safe_ports port 80        # http
acl Safe_ports port 21        # ftp
acl Safe_ports port 443        # https
acl Safe_ports port 70        # gopher
acl Safe_ports port 210        # wais
acl Safe_ports port 1025-65535    # unregistered ports
acl Safe_ports port 280        # http-mgmt
acl Safe_ports port 488        # gss-http
acl Safe_ports port 591        # filemaker
acl Safe_ports port 777        # multiling http
acl CONNECT method CONNECT

#
# Recommended minimum Access Permission configuration:
#
# Only allow cachemgr access from localhost
http_access allow manager localhost
http_access deny manager

# Deny requests to certain unsafe ports
http_access deny !Safe_ports

# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports

# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#

# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
#http_access allow localhost

# And finally deny all other access to this proxy
#http_access deny all
http_access allow all

# Squid normally listens to port 3128
#http_port 3128
http_port 59394
via off
forwarded_for delete

# We recommend you to use at least the following line.
hierarchy_stoplist cgi-bin ?

# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/spool/squid 100 16 256

# Leave coredumps in the first cache dir
coredump_dir /var/spool/squid

# Add any of your own refresh_pattern entries above these.
refresh_pattern ^ftp:        1440    20%    10080
refresh_pattern ^gopher:    1440    0%    1440
refresh_pattern -i (/cgi-bin/|\?) 0    0%    0
refresh_pattern .        0    20%    4320
EOF
  systemctl start squid          #开启squid
  systemctl restart squid          #开启squid
  systemctl enable squid.service #设置开机自动启动
}
install_socks5() {
    
  wget --no-check-certificate https://raw.github.com/Lozy/danted/master/install.sh -O install_proxy.sh
  bash install_proxy.sh --port=59395 --user=asi --passwd=asihacker
}
install_http
install_socks5

 

未经允许不得转载:搬瓦工VPS_美国VPS » centos7.X 搭建 socks5一键脚本

赞 (12) 打赏

相关推荐

    暂无内容!

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

微信扫一扫打赏